NTSB: No Mechanical Faults in Brett James Accident

Cirrus SR22T descended in a tightening spiral near Macon County Airport, killing songwriter Brett James and passengers.

Brett James plane crash
[Credit: Facebook/Brett James]
Gemini Sparkle

Key Takeaways:

  • The NTSB's preliminary report on the fatal crash involving Grammy-winning songwriter Brett James indicates the Cirrus SR22T was in normal mechanical condition and weather conditions were clear.
  • The pilot, likely James (an instrument-rated private pilot), requested a visual approach but then made an unusual transmission about performing a 360-degree turn at 6,800 feet before landing.
  • ADS-B data and witness accounts describe the aircraft flying low, rocking its wings, then entering a descending left turn that quickly became a tight spiral, rolling inverted before impact.
  • The investigation is ongoing, with no initial findings pointing to mechanical failure or adverse weather as causes for the crash.
See a mistake? Contact us.

The National Transportation Safety Board (NTSB) recently published its preliminary report detailing the Sept. 18 crash that killed Grammy-winning songwriter Brett James, along with two passengers. According to the report, the Cirrus SR22T that crashed near Franklin, North Carolina, appeared at this stage to have been in normal mechanical condition when the accident occurred. The crash ended the IFR flight from John C. Tune Airport (JWN) in Nashville to Macon County Airport (1A5) in Franklin.

Sky conditions nearby were clear with no cloud ceilings around the time of the accident, according to the report. As the aircraft approached 1A5, the pilot – likely James, an instrument rated private pilot and the aircraft’s owner – requested and was given a visual approach, after which he reported the airport was in sight.

The controller approved a frequency change to CTAF, although the pilot made an initial call apparently intended for the advisory frequency while still on the controller’s frequency. According to that call, the pilot stated he was currently at 6,800 feet and would perform a 360 degree turn to land on runway 07. No further transmissions were recorded from the aircraft on the controller’s frequency after the controller let the pilot know that he was still on frequency. 

ADS-B data showed that the aircraft began a descending left turn after passing 6,300 feet before setting up for an approach to Runway 07 at 3,300 feet, or a bit less than 1,300 feet above field elevation. The aircraft was about a half a mile from the runway at that point. 

The aircraft could be seen flying over the runway in surveillance video before it entered a descending left turn. That turn quickly became a tight spiral and ultimately resulted in ground impact about a quarter of a mile east of 1A5. Aside from impact wreckage, the report said that all major components were present at the site and that it appears flight control continuity and engine functionality appeared to be in order prior to the crash. 

Nearby witnesses said the Cirrus was seen flying low over a school playground while rocking its wings before it appeared to roll inverted just before descending out of view behind nearby trees.

The investigation is still ongoing at this stage and a final report from the NTSB is forthcoming.

Matt Ryan

Matt is AVweb's lead editor. His eyes have been turned to the sky for as long as he can remember. Now a fixed-wing pilot, instructor and aviation writer, Matt also leads and teaches a high school aviation program in the Dallas area. Beyond his lifelong obsession with aviation, Matt loves to travel and has lived in Greece, Czechia and Germany for studies and for work.

Continue discussion - Visit the forum

Replies: 2

  1. Avatar for Jim_K Jim_K says:

    Well, barring the final report, we can armchair that one with little contest.

  2. UNstable approach. Tight turn to final. DMMS not followed

Sign-up for newsletters & special offers!

Get the latest stories & special offers delivered directly to your inbox

SUBSCRIBE